|
Product Details:
Payment & Shipping Terms:
|
| Type: | Carbon Fiber Infrared Heating Lamp | Warranty: | 10,000 Hours |
|---|---|---|---|
| Reflector: | Ceramic, Gold And No Reflector | Application: | Used In All Kinds Of Industry Heating Process |
| Material: | Quartz Glass & Carbon Fiber | Shape: | Straight |
| High Light: | carbon infrared heater,carbon fiber infrared heating element,textile embossing carbon infrared heater |
||
No.1 Product Descriptions
This is made up of 8-shape high-purity clear quartz twin tube, each tube has Heating Coil of carbon fiber material which runs in U shape in the tube which is filled with inert gas.
Power Density up to 150w/cm is achieved. Heating up and cooling down time is approximately 3-5 seconds.
These heaters are available with gold or white reflector and without reflector.
Reflector is in the form of gold coating on outer rear side of the tube, due to reflector heat loss from backside is prevented and thus power saving is achieved, and also results in making surrounding work area cooler and increases the efficiency and directionality of the heater.
Parameters of Carbon fiber IR Emitters
| Diameter | 10mm, 10.5mm, 11mm, 12mm, 13mm, 15mm, 18mm |
| Wavelength | 1.4-2.6um |
| Total length | 100-2000mm |
| Heated length | 50-1950mm |
| Wattage | 200-4000w |
| Voltage | 80-750v |
| Tube thickness | 1.3-1.5mm |
| Lead wires length | 500mm(standard length) |
Benefits of Coating
1.All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output.
2. The emitters with coating are highly economical, converting practically all the consumed
electrical power into heat.
3.For the emitters with high watt density or the surface temperature of the tube above 800°C , we suggest to use ceramic coating as reflector because the temperature resistance is up to 1000°C .
In addition to 180°(half-tube) coating, we also manufacture 270° coating or other customer specified degrees.
Forms of expression of Coating
No.2 Specific Applications Examples
Solar PV industry for preheating, soldering, heating process in many kinds of stringers, furnace, ovens and PECVD equipment, etc.
PET preform heating in Stretch blow moulding machines
Powder coating curing
Resins Hardening, Rubber coating drying
Adhesives - End polymerization
Food - Pasteurization / Sterilization
Paper Industry - Humidity Control
Industrial Drying - Paint , Varnishes , Dyeing
Semi Conductor Industries - Heating of wafers
Printing - Printing ink drying in screen and offset machines
Plastic welding
Drying of Water-Repellent Coating on Fabric
Textile Embossing and Laminating
No.3 Brief Introduction of Infrared Heating
Modes of heat transfer : conduction-convection-and-radiation
The principle of infrared heating - Radiation and wavelength matching.
All materials including chairs,human body, everything will absorb a fraction of the infrared spectra, reflect a fraction at the surface and allow a fraction of the radiation to pass through.
The importance of wavelength matching between object and infrared emitters
Given above,we can realize the heating and drying purpose at a shorter time with less energy but get a good performance when the infrared radiation which precisely matches the absorption characteristics of the product.
Depending on the temperature of the heating filament, an infrared emitter can delivers distinctly different radiation at various wavelengths.
Short wave radiation can penetrate deep into some solid materials and ensure a uniform through heating.
No.4 FAQ
1. What is the payment term?
prepayment 100% advance via wire transfer, Paypal, Western Union
2. Could you provide sample for performance testing and appearance checking?
Yes, we can provide the sample based on your required specs.
3. What information should i provide when enquire?
Lamp’s type, Total length,Heating length ,Wattage,Voltage,Ceramic end connection ,Lead length in mm (Standard lead wire length 300 mm),Coating available - Gold coating / Ceramic coating, quantity, it couldn’t be better if there is drawing or picture can be provided.
But if it is a new project or it is the first time for you to use infrared emitter, just tell us about your application in details like object material, required working temperature, required time, heating size..
Contact Person: Mr. Arthur Cao
Tel: 86-18656981767
Fax: 86-551-6521-8999
